BRCK SPECS





Weight : 510g (1.125lbs)

1STATUS LIGHT
2POWER BUTTON
3AUX USB
4ETHERNET PORT
5POWER MICRO USB
6FULLSIZE SIMCARD SLOT
7GPIO CONNECTION
(General purpose Input/Output)
8CELL SMA PORT
(Antenna slot)

TECH SPECS SHEET ADVANCED HACKIT PAGE

What is BRCK?

BRCK makes accessing the internet simple and reliable wherever you are. It’s a rugged, cloud managed, full-featured modem/router with built-in fail-overs and programmable GPIO expansion. If there’s a way for you to connect, BRCK will help you get up and stay up no matter where you are.

Physical Specs

Dimensions: 132mm (5.18 inches) by 72mm (2.82 inches) by 45mm (1.77 inches) Weight: 510g (1.125)

Communication Capabilites
  • 802.11 b/g/n Wireless
  • 10/100Mbps WAN/LAN Port
  • Wifi Bridge and Client modes
  • WPA/WPA2 PSK, WPA Enterprise, and WEP Encryption
  • Network Bandwidth Load Balancing
  • NFS/FTP Network Attached Storage
  • External GSM Antenna Port
  • Auto Network Failover
  • Does not support 5GHz networks, only 2.4GHz
Field Ready Hardware
  • Ruggedized body handles drops, dust, and weather
  • 8 hour battery life in Full Power Mode
  • Extended battery life in 5 different low power states
  • 4 GB of onboard storage (Factory Upgradable to 32GB)
  • Power Efficient Atheros 400 MHz Processor
BRCK Cloud Dashboard
AES Encrypted BRCK Cloud Interface
  • All Settings Managed from BRCK Cloud
  • Named BRCK Profiles with Rule-Based Profile Switching
  • Simple and Advanced Configuration Interfaces
  • Recipes for Standard Configurations
  • Multiple Devices Managed per Account
Monitor and Manage
  • Network Settings
  • Power
  • Uptime
  • Bandwidth
  • Expansion Port Logging
BRCK Expansion Programming
  • Simple Script-based Interface for custom apps
  • Upload Custom Arduino Sketches remotely from the cloud
Notification Center (SMS and/or Email Notifications for)

  • Power
  • Battery
  • Network
  • Bandwidth
  • 3G Balance
  • Expansion IO Feedback
Easy 3G Management
Global APN Database
  • Worldwide Database of APN Settings
  • Automatically Synced with BRCK
  • Zero User Configuration when Switching SIMs
Expansion IO
  • Arduino-compatible Programmable 8-bit AVR Expansion Controller
  • 32K Flash
  • 20 General Purpose I/O Pins
  • 8 x Analog to Digital I/O
  • SPI/UART/I2C communication available
  • 2 x 5V 500ma Power output
  • External USB-host port on GPIO expander
  • Power input
  • Standardized connector with open-hardware pinout
  • Realtime clock
  • Wakeup and control BRCK from Arduino-compatible microcontroller.
Power
  • 4-18V power input
  • 8,000 mAh LiPo Battery
  • MicroUSB and GPIO expander power inputs
  • BCS 1.2 Compliant Charging input
  • Reverse voltage and over voltage surge protection
  • Solar input compatible with cell saturation protection
Ports
  • RJ45 Ethernet LAN/WAN Port
  • Easy Change SIM Card Slot
  • USB Host Port, with mobile device charging capacity.
  • RP-SMA External Antenna Connection for 3G/4G antennas
Applications
  • Field and Travel Teams
  • Remote Systems Monitoring
  • Medium and Small Business Network
  • Support Teams
  • Personal Networking


OPEN SOURCE COMPLIANCE